Vizio manual Suspending the SR-F1, Never suspend the speaker with the following figures

2. Suspending the SR-F1.

Note: The SR-L1 can not be suspended.

Caution

The weight of the SR-F1 is approximately 38kg (83.8 Ib). When suspending this speaker, make sure to install it after investigating structure of installation places, and confirming that the suspending wires or belts are heavy-

duty to this speaker.

Secure to lock the fixing metals of the suspending wire/bolt to the speaker.

TOA takes no responsibility for any accidents or injuries resulting from the falling of the SR-F1 due to incorrect installation.

Make sure to perform the general suspending installation of the speaker referring to the following figures.

Be sure to use each two suspending wires or belts, and each wire should be fixed the ceiling reinforcement.

Even in case of oblique installation of the speaker, be sure to use each two suspending wires or belts.

In case of coupled installation of speakers verti-

cally, be sure to connect less than two speak- ers.

Never suspend the speaker with the following figures.

To suspend the speaker	To suspend the speaker	To vertically suspend coupling	To suspend using the
by the ringed one wire.	by one wire from the ceiling.	no more than two speakers.	handles of speaker.

Suspending metal.

Fixing metal as accessory of the SR-F1.

32206 Pan Fitting (Aeroquip made)

Procure the following applicable metal at site.

32326 Ring Fitting (Aeroquip made)