TL-WN727N Wireless Lite-N USB Adapter User Guide
3.1.4 Statistics
Click the Statistics tab of the Utility and you will see the following screen displaying the receiving and transmitting statistical information. Click the Reset Counter button to reset the count of the statistics information.
Figure 3-7 Statistics tab
3.1.5 QSS
Click the QSS tab of the Utility and you can configure the QSS function to joint an existing network quickly in the following screen.
Figure 3-8 QSS tab
If the wireless Access Point supports Wi-Fi Protected Setup (WPS) or QSS, you can establish a wireless connection between this card and the Access Point device using either Push QSS Button method or PIN method. It is recommended that you choose the simplest method that your AP device supports.
)Note:
To build a successful connection by QSS, you should also do the corresponding configuration of the Access Point for WPS or QSS function meanwhile.
- 15 -
