Vizio TL-WN727N manual PBC Method

TL-WN727NWireless Lite-N USB Adapter User Guide

I.PBC Method

If your Access Point is equipped with a push-button for Wi-Fi Protected Setup, you can connect the adapter to the Access Point by Push QSS Button method.

Step 1 Click the QSS button (marked by the red circle) on the screen as Figure 3-8.

Or: Press and hold the QSS button on the adapter (shown on the following figure) for 2 or 3 seconds.

Step 2 Press the QSS button on your Access Point device to build the connection.

II. PIN Method

If your Access Point supports Wi-Fi Protected Setup and the PIN method, you can add the adapter to the network by the following two ways:

1)Enter a PIN from my Access Point

Choose the Config Mode as Registrar and enter the PIN of AP into the field under the Pin Code as Figure 3-9shown. And then click PIN button to start the wireless connection without doing any configuration for AP.

Figure 3-9 QSS - registrar mode

- 16 -