Vizio TL-WR641G manual Login, Status

TL-WR641G

108M Wireless Router User Guide

Chapter 4.Configuring the Router

This chapter describes each Web page's key functions.

4.1Login

After your successful login, you can configure and manage the router. There are ten main menus on the left of the Web-based utility. Submenus will be available after you click one of the main menus. The eleven main menus are: Status, Quick Setup, Network, Wireless, DHCP,

Forwarding, Security, IP & MAC Binding Setting, Static Routing, DDNS and System Tools.

On the right of the Web-based utility, there are the detailed explanations and instructions for the corresponding page. To apply any settings you have altered on the page, please click the Save button.

The detailed explanations for each Web page key’s function are listed below.

4.2Status

The Status page displays the router's current status and configuration. All information is read-only.

1.LAN

This field displays the current settings or information for the LAN, including the MAC address,

IP address and Subnet Mask.

2.Wireless

This field displays basic information or status for wireless function, including Wireless Radio,

SSID, Channel, Mode, Wireless MAC address, and IP address.

3.WAN

These parameters apply to the WAN port of the router, including MAC address, IP address, Subnet Mask, Default Gateway, DNS server and WAN connection type. If PPPoE is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet. You can also cut the connection by clicking the button. If you have not connected to the Internet, just click Connect to establish the connection.

4.Traffic Statistics

This field displays the router's traffic statistics.

5.System Up Time

The total up time of the router from when it was switched on or reset.

- 13 -