Vizio TL-WR641G manual

TL-WR641G

108M Wireless Router User Guide

¾WEP Key - Specify a unique WEP key (in Hexadecimal format) to access the router. To set up an entry, follow these instructions:

First, you must decide whether the unspecified wireless stations can access the router or not. If you desire that the unspecified wireless stations can access the router, please select the radio button Allow the stations not specified by any enabled entries in the list to access, otherwise, select the radio button Deny the stations not specified by any enabled entries in the list to access.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-20:

Figure 4-20

To add or modify a MAC Address Filtering entry, follow these instructions:

1.Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B.

2.Enter a simple description of the wireless station in the Description field. For example: Wireless station A.

3.Privilege - Select the privileges for this entry, one of Allow / Deny / 64-bit / 128-bit / 152-bit.

4.WEP Key - If you select 64-bit, 128-bitor 152-bitin the Privilege field, enter any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. For example: 2F34D20BE2.

5.Status - Select Enabled or Disabled for this entry on the Status pull-down list.

6.Click the Save button to save this entry.

To add additional entries, repeat steps 1-6.

)Note:

When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled.

- 33 -