108M Wireless Router User Guide
¾WAN:This WAN port is where you will connect the cable/DSL Modem, or Ethernet
¾Reset button:
There are two ways to reset the router's factory defaults:
1)Use the Factory Defaults function on System Tools
2)Use the Factory Default Reset button: First, turn off the router's power. Second, press and hold the default reset button then turn on the router's power, until the SYS LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot.
)Note: Ensure the router is powered on before it restarts completely.
¾Wireless antenna
Figure
- 4 -
