Vax
www.vax.co.uk
3. Carpet Cleaner Basics
Unfold handle
Raise handle from storage position until it locks in place (Fig.3/1).
Fig.3/1
Slide collar (A) up on telescoping handle (B) to adjust handle to desired height (Fig.3/2).
A
B
Fig.3/2
Folding handle
Push up on the collar (A) to lower the telescoping handle. Rotate knob (C) backwards to drop the handle into storage position (Fig.3/3).
A
Fig.3/4
Turn tank upside down and unscrew cap (B) (Fig.3/5). The cap consists of 2 pieces - the cap ring (C) and the solution tank valve (D).
B
C
D
Fig.3/5
Pour solution into tank to solution fill line (E) (Fig.3/6).
A
Fig.3/6 | E |
|
C
Fig.3/3
Filling the Solution Tank
IMPORTANT:Unplug carpet cleaner from electrical outlet.
Pull up on solution tank handle (A) and remove solution tank (Fig.3/4).
Fill tank completely with hot tap water (max 50°C). Replace cap. Be sure the valve (D) is in the cap ring (C) before screwing the cap back on the tank (Fig.3/5).
Place tank back onto cleaner (Fig.3/7), pressing firmly to be sure tank is fully positioned.
CAUTION: Avoidsolution contact with the eyes and
!skin. In case of contact with eyes, flush with cold water for 15 minutes. In case of contact with skin, wash with water. If irritation persists, consult your GP.