VIZIO VA19L HDTV10T User’s Manual
Setting Up Your HDTV
•Read this user manual carefully before installing your HDTV.
•The power consumption of your HDTV is about 32W. Use the included power cord. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised.
•Your HDTV should be installed on a flat surface to avoid tipping.
•For proper ventilation, you must allow space between the back of your HDTV and the wall.
•If you want to mount your HDTV on the wall, see “Error! Reference source not found.” for additional information.
•Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the service life of the electronic components.
•Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below.
1.Remove the base:
a.Disconnect the cables from your HDTV.
b.Place your HDTV face down on a soft, flat surface to prevent damage to the screen.
c.Squeeze the tabs on the base, then remove the base.
d.Remove the neck cover.
e.Remove the three (3) screws holding the neck to your HDTV.
2.Mount your HDTV on the wall:
a.Attach your HDTV to a wall mount (sold separately) using the mounting holes in the back panel of your HDTV.
b.Read the instructions that came with your specific wall mount to properly hang your HDTV.
Version 9/12/2008 | 14 |
| www.VIZIO.com |
