VIZIO VW26L HDTV10F User Manual
4.4.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the MENU and buttons to open the TV TUNER SETUP menu and then press the 
button to highlight SKIP CHANNEL. Press the
button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.
4.4.4 Time Zone
Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control.
Press the 
button to highlight the Auto Search selection.
Press the 
button to select your area.
4.4.5 Daylight Saving
As for Time Zone, setting the daylight saving time
for your area will ensure that the correct program times are shown after pressing the GUIDE button on the
remote control. Press the 
button to highlight the Daylight Saving selection. Press the button to select On or Off.
4.5 DTV / TV Input Parental Control
4.5.1 Channel Block
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV.
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the PARENTAL page.
The Password must be entered before the TV will continue with Parental settings. The default password set in the factory is 0 0 0 0. If you are going to use the Parental Control feature you should change the password.
Note: Make sure you write down and store the new password in a secure place. The Reset All Settings feature (see page 37) does NOT reset the password.
Version 2/6/2007 | 36 |
| www.VIZIO.com |
