PARTS AND FUNCTIONSOF THE REMOTE CONTROL
45
2
3
67
89
(ON BACK)
1
10
BATTERY COMPARTMENT: On the back of the hand
held remote control there is a cover that slides off to
expose the battery compartment. Push cover down with
thumb and slide off. The hand held remote control
uses two “AAA” size batteries.
10
INFRARED REMOTE SENSOR: The sensor on the top of the
hand held remote control communicates with the infrared
sensor on the front panel of the CDG X-3 Mark II and should
not be covered or the remote control will not work properly.
1
OPEN/CLOSE: The OPEN/CLOSE button on the hand held
remote control operates the CD/CDG tray. Press once to
open the CDG tray and again to close the tray.
2
DISPLAY: The display button when pressed once will show
the user the remaining number of played-played song
selections on the CD/CDG disc and the amount of time
left to play them. It serves the same function as the
“DISPLAY” button on the front panel of the CDG X-3 Mark II.
(See PARTS AND FUNCTIONS, #5)
3
REPEAT: The REPEAT button on the hand held remote
control allows the user to repeat one song selection or all
song selections. (See PARTS AND FUNCTIONS,
FRONT
PANEL
diagram, #6)
5
SKIP: The SKIP button on the hand held remote control
allows the user to “skip” back to the previous song. When a
song is playing it serves as a “rewind” button and will “SCAN”
the song selection in reverse. On the front panel of the
CDG X-3 Mark II it is the same as the ”B-SCAN” and “PREV”
buttons combined. (See PARTS AND FUNCTIONS,
FRONT
PANEL
diagram, #9, #12)
6
SEARCH: The SEARCH button on the hand held remote
control allows the user to”skip” ahead to the next song. When
a song is playing it serves as a “fast-forward” button and will
“SCAN” the song selection. On the front panel of the
CDG X-3 Mark II it is the same as the ”F-SCAN” and “NEXT”
buttons combined. (See PARTS AND FUNCTIONS,
FRONT
PANEL
diagram, #11, #13)
7
PLAY: Starts and pauses the CD/CDG player. Press once to
start song selection and once to pause. Press again top
resume playing song selection.
9
STOP: Stops the CD/CDG player.
8
MEMORY: The MEMORY button allows the user to program
song selections from the hand held remote control.
To program the CDG X-3 MARK II player with the remote
control the steps are the same as to program the player
from the front panel of the CDG X-3 Mark II. (See PARTS
AND FUNCTIONS,
FRONT PANEL
diagram, #8). When
programming song selections, instead of pressing the
memory button on the CDG X-3 Mark II, press the memory
button on the remote control.
4
10