Rear Panel
1 |
������
���������
2 | 3 | 4 | 5 |
| ���������� |
|
|
��� | �� | ���� ������ | ��� |
| ������ | ��� | ��� |
�� | ��� | ��� | ��� | ��� |
�
�
�
�
6 |
��������
����������
7 | 55 |
���������
���� | ���� |
����� | ���� |
| LA VERNE, CA — USA |
| MODEL: DA 7909RV |
www.vocopro.com
8 |
���������
�����������
����������
������
����������������������������
������������������������������
����������������������������
�����������������
�������� �� | ��� | ��� | ��� | ������� |
�����
�����������
��������������
������������������������������
�����������������������������
������������������������������������������������������
�����������������������������������
����������������������������
1.RS 232 Interface Jack - This jack is used by the factory in the event of future firmware upgrades.
2.Effects Loop IN/OUT Jacks (RCA) - Connect to an external equalizer or effects unit with L/R RCA Ins and Outs.
3.Loop On/Off Switch - Use this to turn on or bypass the Effects Loop IN/OUT channel.
4.Center Out Jacks (RCA) - Acts as a monitor output and must be connected to a powered speaker/monitor or amplifier. The center out channel can be set to either Mic Only or Music Only. See the operations section for detailed instructions on switching between Mic Only and Music Only.
5.Pre Out Jacks (RCA) - This channel outputs both microphone vocals and music to a
6.External Controller Connection - For use with an external controller (not included).
7.Microphone Input Jacks 4 and 5 - Connect 2 additional microphones here using ¼” microphone cables. NOTE: MIC 4 volume is controlled by the MIC 1/4 control on the front panel and MIC 5 is controlled by the MIC 2/5 control.
8.Voltage Selector - This selector toggles between
8