VocoPro owner manual Connecting External Players to the HV-1200

Getting Connected cont.

Connecting External Players to the HV-1200

������������������

There are four Audio/Video input channels on the rear panel of the HV-1200. This allows you to connect up to four external players such as DVD players and CD+G players to the HV-1200. You can switch between these input channels using the AV selector button on the front panel.

What you will need:

•Up to 4 external players with RCA outputs

•RCA Audio/Video cable(s) (yellow, red, white)

To connect external players to the HV-1200

1.Connect one end of an RCA Audio/Video cable to an RCA Audio/Video OUT jack on the external player.

NOTE: Some players, such as CD players, do not have video outputs. In this case, use only the Red and White RCA connectors.

2. Connect the other end of the RCA Audio/Video cable to an RCA input channel on the HV-1200 rear panel.

3. Repeat steps 1-2 for each additional player.

��������

�

�

��� ��� ��� ���

������������������

�������������

�������������

�������������

������������

���������������������

����������������

����������

� ����

������

������

������

� �

	�������
	����������������������
	�����������
����������� ����������	���������
	���������������������������������������
���������������������������������������	�������
	�����������������������������������������
	������������������������������������������

����������������

������������������������

Connecting an External Vocal Effects Device

The HV-1200 has an effects loop which allows you to add additional effects to the microphone channels.

What you will need:

•External Effects Device

•Two ¼” Cables

To connect an External Effects Device to the HV-1200

1.Connect one end of one ¼” cable to the mic loop SEND jack on the rear panel of the HV-1200.

2.Connect the other end of this cable to the input on the external effects device.

3.Connect one end of the next ¼” cable to the output of the external effects device.

4.Connect the other end of this cable to the mic loop RETURN jack on the rear panel of the HV-1200.

NOTE: Your effects device may have a different type of input and output jack. You may need a different type of cable or an adapter to make this connection. Refer to your effects device instruction manual.

Connecting an External Music Effects Device

The HV-1200 has an effects loop which allows you to add additional effects to the music signal.

What you will need:

•External Effects Device

•Two Paired ¼” Cables

To connect an External Effects Device to the HV-1200

1.Connect one end of one paired ¼” cable to the music loop SEND jack on the rear panel of the HV-1200.

2.Connect the other end of this cable to the input on the external effects device.

3.Connect one end of the next paired ¼” cable to the output of the external effects device.

4.Connect the other end of this cable to the music loop RETURN jack on the rear panel of the HV-1200. NOTE: Your effects device may have a different type of input and output jack. You may need a different type of cable or an adapter to make this connection. Refer to your effects device instruction manual.

13