VocoPro owner manual HV-1200 does not turn on, Troubleshooting Chart

Troubleshooting

The HV-1200 does not turn on

•Make sure the HV-1200 is plugged in.

•Make sure the power cord is undamaged. If it is damaged, do not attempt to repair it, contact VocoPro for a replacement cord.

•If the HV-1200 is plugged in to a power strip, make sure the power strip is turned on.

•Check the fuse. If the fuse is blown, replace only with the type marked on the back panel.

Troubleshooting Chart

PROBLEM	CAUSE	SOLUTION
No sound coming from	Input Selector is set incorrectly	Change Input Selector to the
selected music source		correct current playing source
	Music Master Volume control is	Raise Music Master Volume level
	set to minimum	to an appropriate level
	Speakers and Speaker Cables	Check Speakers and Speaker
	are either not connected, loose	Cable connections. Tighten or
	or malfunctioning	replace if necessary.
	Source player is functioning	Replace player and reset the
	incorrectly	HV-1200’s power supply
No graphic output from	Disc is not a CD+G	Insert a CD+G for playback
display devices when
	TV or monitor device is not set	Change TV or monitor settings
playing CD+G’s
	to the correct video setting	to accept video
	Video cable(s) are not properly	Reconnect cables firmly to
	connected	correct video jacks
High pitched squealing	Microphone is pointed to, or	Move microphone away from
occurs when using the	close to speakers	speakers
microphone
	Treble level(s) are too high on	Turn down treble level(s) on
	microphone channel(s)	microphone channel(s)
No microphone output is	The microphone is not turned on	Turn on the microphone
present
	The microphone cable is either	Tighten or replace the
	loose or not functioning	microphone cable
	The Microphone Volume for that	Turn up the Microphone Volume
	channel is set to minimum	for that channel
	The microphone is not	Replace the microphone
	functioning correctly

21