VocoPro KJM-7900 PRO owner manual Quick Start Rear Panel HOOK-UP

BEFORE YOU START

Thank you for purchasing the KJM-7900 Pro. At VocoPro we care about product quality and customer satisfaction. We know the KJM-7900 Pro will provide years of quality service and reliable music entertainment for you when used properly.

PEASE READ CAREFULLY BEFORE USING THE KJM-7900 PRO

Unpacking the KJM-7900 Pro

Carefully remove the KJM-7900 Pro digital mixer from its packaging and operate per manual instructions before discarding the packaging materials. If it should become necessary to return the unit for any reason the original packaging materials are best suited for transporting the unit to minimize any potential damage which may not be covered under the standard warranty.

WARNING: To avoid shock or serious injury do not attempt to connect any external devices or cablesto the KJM-7900 without first disconnecting the unit from all power sources.

QUICK START (REAR PANEL HOOK-UP)

Connecting an Amplifier to the KJM-7900 Pro

Master 1 Out

Locate the “MASTER 1 OUT” section on the back of the KJM-7900 and the “L” and “R” audio input jacks on your amplification sourc e.

Note: you may need a special “RCA to 1/4”” connector cable if you are using an amplifier with “RCA” type jacks. Connect the “L” and “R” audio input connectors of your amplifier to the “L” and “R” 1/4” ouput jacks on the back of the unit, labeled “MASTER 1 OUT”. T he “MASTER 1 OUTPUT” section of the KJM-7900 is controled by the “MASTER 1” slide control.

Monoitor Out “L” and “R”

You can connect the “MONITOR OUT, “L and “R” section of the KJM-7900 Pro to a powered monitor, to achieve a seperate monitor

mix for your vocals, by connecting them to the “L” and “R” input connectors of your external “monitor” amplifier. The “MONITOR OUT” section is controled by the “MASTER 2” slide control.

Record Out “L” and “R”

Connect the “L” and “R” “RECORD OUT” jacks to the left and right ” record in” channels on your recording device. When recordin g, set your record levels from the KJM-7900 individual channel controls. The master volume will only give an “audible” volume thro ugh your external speakers and will have no bearing on the record levels.

Connecting a Music Source to the KJM-7900 Pro

“Source section 3” CD, Laser Disc and DVD Players (with or without a video source)

Locate the “AUDIO IN” section on the back of the KJM-7900. Connect the “L” and “R” output connectors of your player to the corresponding “L” and “R” RCA input jacks on the back of the unit. (example: CD, LD or DVD).

Connecting a TV Monitor

If there is a video output connector on your player, locate the “VIDEO IN” section on the back of the KJM-7900 (to the right of the “audio in” section) and connect your player’s video out connector to the corresponding “VIDEO IN” connector (example: CD, LD or DVD). Then connect the video line out from the KJM-7900 to your TV monitor’s line in connector. If it is a television be sure to swit ch it to video mode.

2