PARTS AND FUNCTIONS
(MASTER CONTROL MODULE)
and expandability module...
17
16
15
1
2
3
4
5
6
7
8
9
4.Digital Key Control & Multiplex: The digital key control feature works in the Master 2 mode. Press the Master 2/Key Control button on the desired channel (to the down position) then adjust the key control up or down to raise or lower the “key” of the music.
The Multiplex feature works only with discs recorded in the “multiplex” format. It will delete the vocal tract on multiplex CD’s or tapes.
5.Delay: Adjusts the length of each interval. The amount of delay for each mic channel is controlled by the Aux 2 (post) fader.
6.Repeat: Adjusts the interval repetition of the echo effect. The amount of repeat for each mic channel is controlled by the Aux 2 (post) fader.
7.Echo: Adjusts the echo parameter
8.Echo On/Off Switch: The digital “effects” (echo, repeat and delay) can be set to the desired levels and switched off when not in use by pressing the switch to the down position.
9.Master 1/Master 2: This allows the user to select between the
Master 1 mode or Master 2 mode. Note: This must be set in theMaster 2 position in order to send the key control signal to a monitor.
10.Master/Cue Headphone Switch: Switches the LED level meter between the entire mix or “cue” signals from individual channels.
11.Cue Level: This sets the level within the headphones.
1012. Headphone Jack
13. Master 2 Fader (Monitor Output): This raises or lowers the
11volume for the Master 2 output jacks. Note:
12
1413
1.DC 12V Lamp Connector
2.Power On/Off
3.LED Level Meter: Displays sound or cue levels from the music sources.
14.Master 1 Fader: This raises or lowers the volume for the master 1 output jack.
15.Aux 1 Send Master Contol: Sets the master level for the signal being
sent to an external effects unit through the Aux 1 Send jack. Note: The key control feature is
16.Aux 2 Send Master Control: Sets the master level for the signal being sent to an external effects unit through the Aux 2 jacks. Note: The Aux 2 On/Off switch(s) on the music module must be set in the down position to work with the Aux 2 Send Master Control. Note: The key control feature is
17.Stereo Return (Aux 1) Master Control: Controls the signal being received from an external effects unit.
6