VocoPro PA-MAN owner manual Microphone Channel Input and Effect Control

Descriptions and Functions, cont.

Microphone Channel Input and Effect Control

1.Level - Adjust the volume output of the microphone channel.

2.High - Adjust the high end of your microphone output, adding treble to the audio.

3.Low - Adjust the low end of your microphone output, adding bass to the audio.

4.Echo - This controls the overall level for the ECHO effect on all three MIC INPUTS. This effect applies slight delayed repitition(s) to the vocals providing for a rich, layered vocal sound. Rotate clockwise to increase the amount of ECHO effect applied to the signal, and counter-clockwise to decrease.

5.¼” Insert Effects Loop Output/Input - Connect an external effects processor to each channel with this ¼” input. To ensure that your effects processor will properly function with the PA-MAN’s INSERT connection, use a cable with a ¼” stereo TRS (tip ring sleeve) connector.

6.¼” Line Input - Connect any microphone or instrument device with a ¼” mono connector to this line level connection.

7.XLR Microphone Input - Connect an XLR microphone cable here to add an additional mic input to the channel.

�

�

�

�

�

�

�

16