VocoPro UHF-5805 dimensions Mounting

Mounting

To install the UHF-5805 to a 19” rack case, complete the steps below.

1.Attach mounting brackets to the UHF-5805 via the supplied mounting screws.

2.Align the UHF-5805 with the desired space in rack and slowly slide in, rear panel first.

NOTE: Depending on your rack case design, it may be neces- sary to allow for sufficient space for the antennas.

3.While aligned, use rack case screws (not included) in the order shown below to stabilize the UHF-5805 in its space, using the “X” rotation (numbered below) will ensure even tension and flush alignment.

NOTE: Do not tighten screws firmly until all screws are in place.

�	�
�	�

9