Getting Started
Setup
Connecting power to Base Unit/Hand- set Charger
1.Plug the power adapter into an electri- cal outlet, and the connector into the
connector jack at the bottom of the base unit.
2. Choose the location for your handset charger, and plug its power supply into an electrical outlet.
Installation of Battery Pack in Handset
Follow the steps below:
1.Remove the battery compartment cover by pressing on the indentation
and sliding downward. Place the new battery pack in the handset with the positive and negative poles aligned in the battery compartment.
2. Replace the battery cover by sliding it upwards.
3. If the new battery pack is not already charged, place the handset in its charger, and allow it to charge for
Charging of the Handset Battery Pack
The handset of your cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever handset is in its charger.
You should charge the batteries for
ing when:
•The low battery message is displayed:
•The handset seems completely dead, the LCD is completely clear and does not activate when you press the keys.
NOTE: While in PLACE IN CHARGER (low battery) mode, the keypad sounds, backlighting and speakerphone features will not work. When the battery has been charged, the features will return to their normal function.
IMPORTANT:
1.Do not dispose of the battery pack in a fire, it might explode.
2.Do not open or mutilate the battery pack. Toxic substances may be re- leased, causing harm to eyes or skin.
3.Exercise care in handling batteries in order to prevent an accidental short of the charge contacts, potentially causing the batteries to overheat.
6
