Headset Operation
Your IP 8100-2/8100-3 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree operation. If you choose to use the headset option, you must obtain an optional accessory headset, which is compatible with the IP 8100-2/8100-3.
To purchase a headset, visit us on the web at www.vtechphones.com or call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm headset, locate the headset jack on the IP 8100-2/8100-3 handset. Connect the plug on the headset cord to the jack (under a small rubber flap) on the cordless handset. The plug should fit se- curely. Do not force the connection.
NOTE:
•Whenever a compatible headset is connected to the cordless handset, the microphone on the handset will be muted. This is done to limit the ef- fect of background noise.
• When a compatible headset is con- nected to the cordless handset, your speakerphone feature will be dis- abled. To use your speakerphone fea- ture, simply disconnect the headset from the handset.
Belt Clip
The IP 8100-2/8100-3 is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the handset. The belt clip should snap securely into place. Do not force the connection.
