Vornado SF-140 warranty Storage & Care, Proper Storage, Mineral Build-Up

Storage & Care

PROPER STORAGE

Preparing your Everyday Steam Mop for storage is quick and simple. When you have finished your mopping tasks, follow the steps listed below.

1.Gently press down on On/Off Switch until it clicks – red Power Indicator Light will turn off. Unplug power cord from electrical outlet.

2.Place Mop Head on top of Resting Pad, and allow unit to cool (at least 30 minutes for complete cooling).

3.For convenience it is recommended to disconnect Telescopic Pole, and if attached, remove Microfiber Pad from Mop Head. If pad is dirty you may wash it, either by hand or in a washing machine. Allow to air-dry.

4.Unscrew and remove Boiler Cap. Drain any water remaining in Boiler into a sink or tub, to minimize potential mineral build-up and prevent overfilling during next use. Replace Boiler Cap (do not fully tighten).

5.Reconnect Telescopic Pole. If desired, collapse Telescopic Pole to its shortest length (ideal for limited storage space). Refer to Page 6 for details.

6.Wrap power cord around Cord Brackets.

7.Store Everyday Steam Mop in a cool, dry location, along with all included accessories.

MINERAL BUILD-UP

A common maintenance need for steam appliances is the removal of build-up caused by high mineral content in many municipal water supplies. This mineral build-up may limit the effectiveness and reduce the life of your Everyday Steam Mop.

The best way to minimize mineral build-up is to use distilled or de-mineralized water when using your Everyday Steam Mop. In addition, it is recommended that the Boiler be cleaned at least once a month in order to remove any deposits that form. This will help to extend the life of your Everyday Steam Mop and keep it functioning at its maximum potential.

To remove mineral build-up:

1.Gently press down on On/Off Switch until it clicks – red Power Indicator Light will turn off. Unplug power cord from electrical outlet.

IMPORTANT: Unit should remain off and unplugged during cleaning procedure.

2.Place Mop Head on top of Resting Pad, and allow unit to cool (at least 30 minutes for complete cooling).

3.For convenience it is recommended to disconnect Telescopic Pole, and if attached, remove Microfiber Pad from Mop Head. Leaving them off during cleaning will make the process easier.

4.Remove Boiler Cap and drain any water remaining in Boiler into a sink or tub.

5.Fill Measuring Cup with vinegar.

6.Pour vinegar into Boiler throught Boiler Fill Hole.

7.Allow vinegar to soak in boiler for 30-40 minutes.

8.Drain vinegar from Boiler into a sink or tub. Refill Boiler with fresh water, drain and repeat until vinegar odor dissipates.

9.Replace Boiler Cap (do not fully tighten), reconnect Telescopic Pole and store your Everyday Steam Mop as usual.

ENGLISH 11