Vornado SF-435W warranty Using Your Compact Fabric Steamer, Filling Boiler with Water

Using Your

Compact Fabric Steamer

FILLING BOILER WITH WATER

1.Place Compact Fabric Steamer on a flat, level surface.

2.Make sure power cord is unplugged from electrical outlet.

3.Remove Boiler Cap by unscrewing it in a counter-clockwise direction. This will expose the Boiler’s fill hole.

CAUTION: If unit has been in use, allow Boiler to cool (5 minutes for minimum cooling) before removing Boiler Cap and adding water.

4.Carefully fill Boiler with water from a faucet, bottle or cup. Use Boiler Level Window to gauge water level, stopping when it reaches the MAX mark.

NOTE: MAX mark on Boiler Level Window represents the unit’s maximum usable water capacity (7 oz. / 200 ml.). Exceeding this amount will result in water spitting from Steam Nozzle.

NOTE: In order to minimize potential mineral build-up and prolong the life of your Compact Fabric Steamer, distilled or de-mineralized water is recommended when filling Boiler.

5.Replace Boiler Cap by screwing it in a clockwise direction back into Boiler’s fill hole. Do not over-tighten Boiler Cap.

CONNECTING ACCESSORIES

1.Select either Fabric Brush or Lint Remover – only one accessory can be used at a time.

2.Insert your selected accessory into Accessory Adapter (FIGURE 1-A).

3.Slide Accessory Adapter (with inserted accessory) onto Steam Nozzle (FIGURE 1-B). Make sure Accessory Adapter is oriented as shown, to prevent blocking steam flow.

1-A

1-B

FIGURE 1

6