Cleaning and Maintenance |
| |
Cleaning Instructions | B | |
Proper cleaning of your Ultrasonic Vortex Humidifier is essential to the | ||
| ||
air quality and performance of your unit. The frequency in which your |
| |
Humidifier will need to be cleaned will vary, depending on use, water |
| |
hardness, and outside environmental factors. It is recommended, |
| |
assuming average use, to thouroughly clean the unit several times |
| |
throughout the season, or when algae, mineral deposits or other |
| |
particles begin to form. To clean your Humidifier, follow these |
| |
instructions: |
|
1.Turn the Humidifier Off and unplug. Do not submerge into water. Remove Mist Outlet by grasping base of Outlet and pulling up (A).
A
3.Fill Base and Water Tank with a mixture of water and white vinegar - mixed at a ratio of one (1) 8 oz. cup of undiluted white vinegar per 1 gallon of water (C). Do not overfill, discard unused portion. Solution should remain in Base and Water Tank for 20 minutes to dissolve any residue.
C
8 oz. | + | 1 gal. |
White Vinegar |
| Water |
2.Empty water from Base and Water Tank. (See FILLING WATER TANK for instructions). Place Mist Outlet inside Water Tank to clean both components at the same time (B).
Note: Do not operate the unit during cleaning.
10English
4.Empty after 20 minutes and clean Mist Outlet and all interior surfaces of Base and Water Tank with soft brush. Dampen soft cloth with undiluted white vinegar and wipe down to remove scale.
Rinse thoroughly with clean warm water before disinfecting.