Anytime any maintenance or repairs are done (including clearing jams),
FIRST:
1.Disconnect the Nailer from the air hose.
2.Empty the Magazine (92) completely.
3.Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon- nected and is incapable of firing any nails.
Clearing Jams
1.Occasionally a nail may become jammed in the firing mechanism of the Roofing Nailer, making the tool inoperable.
2.To remove a jammed nail, disconnect the Roofing Nailer from its compressed air supply. Empty the Magazine (92) completely of nails. Attempt to fire the Roofing Nailer into a piece of scrap wood to ensure it is disconnected and is incapable of firing any nails.
3.Use a pair of needle nose pliers (not included) to remove the jammed nail (usu- ally from the Feed Pawl (61) area). Replace the coil of nails into the Roofing Nailer. Close the Magazine Cover (101) and Door (80) securely. Then, recon- nect the air supply hose to the tool.
Anytime any maintenance or repairs are done, FIRST:
1.Disconnect the Nailer from the air hose.
2.Empty the Magazine (92) completely.
3.Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon- nected and is incapable of firing any nails.
Inspection, Maintenance, and Cleaning
1.Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil, then wipe dry.
Do not use detergent oil or additives as these lubricants will cause accelerated wear to the internal seals.
SKU 41209 | For technical questions, please call | Page 11 |
