Harbor Freight Tools 41209 operating instructions Parts List

PARTS LIST

Part #	Description	Part #	Description	Part #	Description
1	Screw (6mmx22mm)	38	Rocker	72	Nose
2	Cap Assembly	39	Roll Pin	73	Trip Foot Assy.
3	Gasket	40	Straight Pin (161)	74	Door Hinge Pin
4	Exhaust Bumper	41	Rocker Pin	75	Holding Pawl
5	Head Valve Spring	42	Trigger	76	Compression Spring
6	O-Ring	43	Roll Pin	77	Kickback Pawl
7	O-Ring	44	Trip Lever Guide	78	Screw (6mmx35mm)
8	Head Valve	45	Nut	79	Pawl Drive Pin
9	Head Valve Seal	46	Washer (Piston, Upper)	80	Door
10	Cylinder Sleeve	47	O-Ring	81	Latch Retainer Pin
11	O-Ring	48	Piston	82	Latch Spring
12	O-Ring	49	Washer (Piston, Lower)	83	Door Latch
13	Bullhead Ring	50	Driver	84	Screw (6mmx12mm)
14	O-Ring	51	Driver Guide (Front)	85	Lock Washer
15	Frame	52	Driver Guide (Back)	86	Piston Washer
16	Filter (Optional)	53	Drive Bumper	87	Gage
17	Air Plug (1/4” NPT)	54	Trip Cover	88	Gage Nut Plate
21	O-Ring	55	Elastic Stop Nut (M6x1)	89	Post Retainer
22	Handle End Cap	56	Screw (6mmx22)	90	Receiver Spring
23	O-Ring	57	Spring (Trip Lever)	91	Spring
24	O-Ring	58	Trip Lever	92	Magazine
25	Trigger Valve Cap Assy.	59	Screw (6mmx10mm)	93	Magazine Wear Clip
26	O-Ring	60	O-Ring	94	Spacer
27	O-Ring	61	Feed Pawl	95	Magazine Post
28	Trigger Valve	62	Roll Pin	96	Magazine Bushing
29	O-Ring	63	Hinge Pin Retainer	97	Washer
30	O-Ring	64	Retaining Ring	98	Platform Assy.
31	Trigger Valve Housing	65	O-Ring Feed Piston Cap	99	Cover Hinge Pin
32	O-Ring	66	Feed Piston Cap	100	Gauge Bracket
33	Poppet Orifice Plate	67	Feed Piston Bumper	101	Magazine Cover
34	Compression Spring	68	Feed Piston	102	Cover Retainer
35	(3129)	69	O-Ring Piston Stem	103	Hex Wrench
	O-Ring
36	Trigger Stem	70	Spring (Feed Pawl)	104	Tool Oil
37	Trigger Valve Cap	71	Feed Pawl Pin

NOTE:

Some parts are listed and shown for illustration purposes only, and are not available individually

as replacement parts.

SKU 41209 For technical questions, please call 1-800-444-3353. Page 13