How To Use
Installing Water Tank
1.Remove Water Tank. Remove Water Tank Cap and fll Water Tank with water. Replace Water Tank Cap and reinstall Water Tank.
Using distilled or demineralized water will maximize the life and performance of the unit.
CAUTION: Do not allow steamer to run dry. Unit may overheat causing the
Operation
1.Unwrap power cord and plug into 120V grounded outlet.
Note: Extension cords are not recommended.
2.Press Power Switch to On (I) position.
3.Choose desired Steam Level by pressing Steam Level Switch.
See STEAM LEVEL RECOMMENDATIONS on page 10 for fabric tips.
Note: The unit may take up to 2 minutes to produce steam. Be care- ful of hot steam at all times. During operation, the Steam Hose may make a gurgling noise, refer to TROUBLESHOOTING on page 13.
9
