•If you have caller ID service the clock will be set automatically with incoming calls, but you will need to make sure the year is correct.
•Press and hold 
/SKIP or
/REPEAT while setting the minutes or year to advance or decrease by increments of ten.
Answering system
Activate the answering system
The answering system must be turned on to answer and record messages.
If the answering system is turned on, the ANS ON/OFF light will be on. Press ANS ON/OFF to turn the answering system off or on.
Set the clock
Before playing each message, the answering system announces the day and time of the message received. Before using the answering system, set the day, time and year, so that messages are dated correctly. If the clock is not set before new messages are recorded, the system will announce “Time and day not set.” before each message is played to remind you to set the clock.
1.Press CLOCK. The system announces the clock setting (e.g. day, time and year), then announces: “To set the clock, press CLOCK.”
2.Press CLOCK. The system announces the current day.
3.Press 
/SKIP or 
/REPEAT until the system announces the correct day, then press CLOCK. The system announces the current hour.
4.Press 
/SKIP or 
/REPEAT until the system announces the correct hour, then press CLOCK. The system announces the current minute.
5.Press 
/SKIP or 
/REPEAT until the system announces the correct minute, then press CLOCK. The system announces the current year.
6.Press 
/SKIP or 
/REPEAT until the system announces the correct year, then press CLOCK. The system announces the current clock setting and exits the clock menu.
32 | www.vtechphones.com |
