The CHARGE light is off.
•Clean the charging contacts on the handset, telephone base and charger each month with a pencil eraser or a dry
•Make sure the power adapter and telephone line cord are plugged in correctly and securely.
•Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset.
The telephone does not ring when there is an incoming call.
•Make sure the handset ringer volume is not set to off.
•Make sure the telephone line cord and power adapter are plugged in properly.
•The handset may be too far from the telephone base. Move it closer to the telephone base.
•There may be too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.
•If other telephones in your home are having the same problem, the problem is in the wiring or local telephone service. Contact your telephone service provider (charges may apply).
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
•Test a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is in the telephone wall jack. Contact your telephone service provider (charges may apply).
•The telephone line cord may be malfunctioning. Install a new telephone line cord.
•Remove and install the battery again and then place the handset in the telephone base.
•Wait for the handset to synchronize with the telephone base. Allow up to one minute for this to take place.
My caller ID features are not working properly.
•Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your telephone.
•The caller may not be calling from an area which supports caller ID.
•Both your and your caller’s telephone service providers must use equipment compatible with the caller ID service.
•The caller ID information shows after the first or second ring.
•If you subscribe to
My handset beeps and is not performing normally.
•Make sure the power cord is securely plugged into the telephone base. Plug the telephone base into a different working electrical outlet not controlled by a wall switch.
•Move the handset closer to the telephone base. It may be out of range.
•Reset the telephone base by unplugging the electrical power to the base. Wait for 15 seconds and plug it back in again. Allow up to one minute for the cordless handset and the telephone base to synchronize.
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
There is interference during a telephone conversation.
My calls fade out when I am using the cordless handset.
•The handset may be out of range. Move it closer to the telephone base.
•If you subscribe to
•Appliances or other cordless telephones plugged into the same circuit as the telephone base can cause interference. Try moving the appliance or telephone base to another outlet.
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
•If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your telephone or modem farther apart from each other, or use a different
surge protector.
•The location of your telephone base can impact the performance of your cordless phone. For better reception, install the telephone base in a centralized location within your home or office, away from walls or other obstructions. In many environments, elevating the telephone base improves overall performance.
•Disconnect the telephone base from the telephone wall jack and plug in a corded telephone. If calls are still not clear, the problem is probably in the wiring or local telephone service. Contact your telephone service provider (charges may apply).
•If other telephones in your home are having the same problem, the problem is in the wiring or local telephone service. Contact your telephone service provider (charges may apply).
I hear other calls when using the telephone.
•Disconnect the telephone base from the telephone wall jack. Plug in a different telephone. If you still hear other calls, the problem is probably in the wiring or local telephone service. Contact your telephone service provider.
I hear noise on the cordless handset and the keys do not work.
• Make sure the telephone line cord is plugged in securely.
OUT OF RANGE OR NO PWR AT BASE shows on the handset screen.
•The handset may be out of range. Move it closer to the telephone base.
•Make sure the power cord is securely plugged into the telephone base. Use a working electrical outlet not controlled by a wall switch.
•Reset your telephone by unplugging the power adapter from the telephone base. Disconnect the battery from the cordless handset. Wait for 15 seconds, then plug in the power adapter and reinstall the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize.
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
10
