VTech DS6151 user manual There is no telephone line connected on line

Appendix

Screen display messages (continued)

L1)NO LINE	There is no telephone line connected on line 1.
L2)NO LINE	There is no telephone line connected on line 2.
Line 1 Incoming call	There is an incoming call on line 1.
Line 2 Incoming call	There is an incoming call on line 2.
Microphone ON	MUTE is turned off and the person on the
	other end can hear you.
Microphone off	You have turned off the handset microphone.
	The other party cannot hear you but you can
	hear the other party.
No signal, call ended	Communication between the system handset
	and telephone base is lost during a call.
Not available at this time	One system handset or the telephone base is
	already viewing the call log or directory and
	another handset/telephone base attempts to
	review it.
Out of range OR	The system handset cannot communicate with
no power at base	the telephone base. Check the telephone base
	power connection or move closer.
Paging all handsets	The telephone base is paging handset(s).
**Paging**	The system handset is paged.
Place handset in charger	The battery is very low. Place the system
	handset in the telephone base for recharging.
Ringer muted	The ringer is muted temporarily during an
	incoming call.
Saved	Your selection has been saved.
Unable to call try again	You try to make an intercom call but the system
	handset/telephone base you are calling is in
	the directory, in the call log, on an outside call,
	or the system handset is out of range.
Unable to save	You try to save a caller ID entry with no name
	or number.

67