VTech DS6151 Replace a handset, To deregister all handsets, Deregister all handsets?, To reset

Appendix

Replace a handset

If you want to replace a handset or re-assign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset.

To make deregistration easier, read all of the instructions on this page before you begin.

To deregister all handsets:

1.Remove any handset from the telephone base. Press and hold HOLD on the telephone base for about 10 seconds until the telephone base displays

Deregister all handsets?

2.Press the YES softkey.

3.The deregistration process takes about 10 seconds to complete. All handsets show Press [HOLD] on base for 4 sec, then press [#] on handset when the deregistration completes.

If deregistration fails, you may need to reset the telephone and try again.

To reset:

1.Pick up the registered handset and then press or .

2.Press OFF and then place the handset back in the telephone base.

-OR-

1.Unplug the power adapter from the telephone base, then plug it back in.

You cannot deregister a handset if any system handset or telephone base is in use.

73