Answering System Operation
Answering System Operation
the system announce the feature you want to set. Refer to the Feature Summary chart below for a description of the features and your choices.
3 Press CHANGE to hear the current setting. Continue to press CHANGE to adjust the current setting.
4 Press TIME/SET to confirm your setting.
5Press MENU to move on to the next feature, or press a MAILBOX key to exit Feature Setup.
Use the
FEATURE SUMMARY Default settings indicated by * .
SYSTEM ANNOUNCES: | DESCRIPTION/DIRECTIONS: | |
|
| |
ì Set Security codeî | Set the remote access code you will use | |
50* | to access features and functions of the | |
answering system from a touch tone | ||
| ||
| phone. The code can be changed to any | |
| ||
|
| |
ìSet Audible Message Alertî | When Message Alert is turned ON, the base | |
Off* | beeps once every 10 seconds when new | |
On | messages have been received. | |
|
| |
ìSet Announce Onlyî | When you turn Announce Only ON, callers | |
Off* | hear your announcement, but cannot leave | |
On | a message. | |
|
| |
ìSet Call Screeningî | When you turn Call Screening OFF, you will | |
not hear incoming messages as the caller | ||
Off | ||
leaves them. | ||
On* | ||
| ||
|
| |
ìSet Number of Ringsî | Choose how many times the phone will ring | |
2 | before the system answers a call. With Toll | |
4* | Saver active, the system answers after two | |
6 | rings when you have new messages and | |
Toll Saver | after four rings when you have no new | |
| messages. | |
|
|
• NOTE: Exit Feature Setup at any time by pressing a MAILBOX button.
38