Started | Setup |
|
|
| Follow the steps below: | ||
| Installation of Battery Pack in Handset |
| |
Getting |
| 1. | Remove the battery cover by |
| 2. | Place the new battery pack in the | |
|
|
| pressing on the indent and sliding |
| 1 | 3 | downward. |
|
|
| Handset with the metal contacts |
|
|
| aligned with the charge contacts |
|
|
| in the battery compartment. |
|
| 3. | Replace the battery cover by sliding |
|
|
| it upwards. |
|
| 4. | If the new battery pack is not |
|
|
| already charged, place the Handset |
|
|
| in its Charger, and allow it to |
|
|
| charge for 12 hours. After initial |
|
|
| charge, a maintenance charge of |
|
| 2 | 8 hours should be sufficient. |
|
|
| |
The original Handset that is shipped with your i 5881 system will be automatically registered to the Base.This Handset is HANDSET 1.
As you register additional Handsets to the system, they will be assigned extension numbers in the following order: HANDSET 2, HANDSET 3, etc.
Whenever a charged Handset battery pack is installed, the Handset will automati- cally begin SEARCHING FOR BASE (if previously registered), or it will prompt you to ENTER BASE ID to register the new Handset.
Charging of the Handset Battery Pack
The Handset of your i 5881 cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever the Handset is in its charger. Maximum talk time on a full charge is 8 hours, and maximum standby time is 5 days.
You should charge the battery pack for 12 hours when you first receive your phone. You’ll know the battery pack needs charging when:
• The low battery message is displayed :
• The Handset seems completely dead, the LCD is completely clear and does not activate when you press the keys.
8
