•The entries you store in speed dial memory will be marked with 01 through 09 and also display in the directory.
•Press OFF at any time to exit speed dial mode.
•W h e n m e m o r y is full the screen displays MEMORY FULL, an error tone sounds and you cannot store a new number until you delete a record in speed dial memory o r t e l e p h o n e directory.
Speed Dialing
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) in the speed dial memory locations you assign (numbered 1 through 9) in each handset. These numbers can be dialed with two button presses. You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory for instructions.
Store a Number/Name in Speed Dial
1.Press PROG. Then press 
or 
until the screen displays SPEED DIAL.
2.Press SELECT. The screen displays ENTER
3.Press the key (1 through 9) to assign the speed dial location this number will be stored. The screen displays ENTER NAME.
4.Using the chart below, enter up to 15 characters for the name you’re storing. Use
to backspace and make corrections; use 
to advance and add a space.
|
|
| Presses |
|
|
|
Dial Key | Once | Twice | 3 Times | 4 Times | 5 Times | 6 Times |
1 | 1 |
|
|
|
|
|
2 | A | B | C | 2 |
|
|
3 | D | E | F | 3 |
|
|
4 | G | H | I | 4 |
|
|
5 | J | K | L | 5 |
|
|
6 | M | N | O | 6 |
|
|
7 | P | Q | R | S | 7 |
|
8 | T | U | V | 8 |
|
|
9 | W | X | Y | Z | 9 |
|
0 | 0 |
|
|
|
|
|
* | * |
|
|
|
|
|
# | & | ‘ | , | - | . | # |
16 BASIC OPERATION | www.vtechphones.com |
