Answering System Operation At the Base
•By setting announce only to on or off, you decide which announcement your callers will hear when the system answers a call (the system comes set for normal answering, with announce only turned off). See Set announce only, located in the Feature Summary chart later in this section, to change your announcement selection.
•Announcements less than three
Enter answering system
feature setup and choose a feature to set..
...
Turn answering system on or off
Select a feature setting
Record outgoing announcements, and memos
Review/change clock setting; confirm feature settings
s e c o n d s i n length will not be recorded.
Basic
Record Your Announcement
1.Press MENU until you hear “Record outgoing message.”
2.Press REC/MEMO. After you hear “Now recording” followed by a beep, speak toward the base to record an announcement up to 90 seconds long.
3.Press PLAY/STOP. The system plays back your recorded message.
To review your announcement at any time:
1.Press MENU until you hear “Record outgoing message.”
2.Press PLAY/STOP, the system plays the current announcement.
To delete your announcement:
Press DELETE during announcement playback. The system will use the
Operation
www.vtechphones.com | BASIC OPERATION 27 |
