GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit. Use a coin or screwdriver to open the battery
cover.
3. Install 2 new “AA” (UM3/LR6)
batteries following the diagram inside the battery box. (The use of new
alkaline batteries is recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
•Install batteries correctly observing the polarity (+,
•Do not mix old and new batteries.
•Do not mix batteries of different types: alkaline, standard (carbon- zinc) or rechargeable
•Remove the batteries from the equipment when the unit will not be used for an extended period of time
•Always remove exhausted batteries from the equipment.
•Do not dispose of batteries in fire.
•Do not attempt to recharge ordinary batteries.
•The supply terminals are not to be
•Only batteries of the same and equivalent type as recommended are to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
Getting Started
3
