Answering system operation

New message indication

The message window on the telephone base flashes and shows on the handset when there are new answering system messages.

If the new message alert tone is turned on, the telephone base beeps every 10 seconds when there are unreviewed messages.

Message playback

If you have new messages, the telephone plays only the new messages (oldest first). If there are no new messages, the telephone plays back all messages (oldest first).

When playback begins, you hear the total number of messages followed by the day and time of the message. After the last message, the telephone announces, “End of messages.”

To play messages with the telephone base:

1.Press /PLAY/STOP to listen to messages. Options during playback:

Press VOL to adjust the speaker volume.

Press /SKIP to skip to the next message.

Press /REPEAT to repeat the message currently playing. Press /REPEAT twice to listen to the previous message.

Press X/DELETE to delete the current message. The system advances to the next message.

Press /PLAY/STOP to stop.

To play messages with a handset:

1.Press MENU/SELECT to show the menu when the handset is not in use.

2.Press MENU/SELECT to select >ANS. SYSTEM.

3.Press MENU/SELECT to select >PLAY MSGS. Options during playback:

Press VOL to adjust the speaker volume.

Press 6 to skip to the next message.

Press 4 to repeat the message currently playing. Press 4 twice to listen to the previous message.

Press 3 to delete the current message. The system advances to the next message.

Press 5 to stop.

When the answering system has less than five minutes of recording time

left, the remaining time is announced.

When F and number of messages are flashing in the message window, the memory is full. Delete some messages to make room for more.

You can only delete old messages, which are messages you have played.

28

Page 32
Image 32
VTech LS6225-3, LS6226-2, LS6225-4 New message indication, Message playback, To play messages with the telephone base