VTech LS6226-2, LS6225-4, LS6225-3, LS6225-5, LS6225-2 Telephone base and charger installation

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below. The telephone base is designed for tabletop use only.

Make sure that the electrical outlet is not controlled by a wall switch.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.

Telephone		Telephone
		wall jack
base power
			Electrical outlet
adapter	If you have DSL
			not controlled by
	high speed Internet		a wall switch
	service, a DSL
	filter (not included)
	is required.
Electrical outlet			Charger
not controlled by		Telephone	adapter
a wall switch
		line cord

Telephone base

Charger

• Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595- 9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet.