log placement | ILDV20/ILDV30 Fireplace Insert |
Before you begin - This unit is supplied with six (6) ceramic fiber logs. Do not handle these logs with your bare hands. Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash your hands gently with soap and water to remove any traces of fibers.
WARNING
The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly posi- tioned in the appliance. Never add additional logs or embellishments such as pine cones or vermiculite to the heater. Only use the logs supplied with the unit.
Failure to position the parts in accordance with diagrams below or to use only parts specifically approved for this heater may result in property damage or personal in- jury.
INSTALLING LOGS AND ROCK WOOL (EMBER MATERIAL) IN FIREBOX
1.Break up rock wool (ember material) into
2.Do not cover rectangular slots located at rear of burner.
Ember Material Area
WARNING
Do not use the entire bag of rock wool to cover burner area.
Figure 16a
Ember Material Area
FP1968
Figure 16b
Place Ember Material
LG536
Ember Material
83D0511 | 21 |
