OPERATING INSTRUCTIONS | ILDV20/ILDV30 Fireplace Insert |
Lighting burner
main burner switch
The “ON/OFF” switch for the main burner can be found on the right side of insert surround. This switch allows you to turn on and to turn off the main burner without using the gas valve knob. Make sure the button is in the “ON” position to light the main burner. Figure 27
Lighting the burner
Depress and turn the knob counterclockwise 
to the “ON” position. Figure 28 It will take less than four (4) seconds for the burner to ignite.
Pilot position
Depress and turn knob to pilot position to keep burner off while maintaining the pilot light. Figure 29
ON
OFF
Figure 27 -
On/Off Switch
N |
|
|
O |
| O |
|
| F |
|
| F |
|
| P |
PILOT | ||
T | L |
|
O |
|
|
Figure 28 - On Position
to turn off gas
| O |
T | N |
O |
|
L |
|
I |
|
P |
|
| F |
| F |
| O |
PILOT | |
Figure 29 - Pilot Position
Depress and turn knob clockwise to “OFF” posi- tion. Figure 30
| PI |
| L |
| O |
| T |
F |
|
F |
|
O | O |
| N |
PILOT
Figure 30 - Off Position
adjusting blower speed
The internal blower helps transfer heat from heater into room. It will not turn on until heater is up to temperature (approxi- mately 10 minutes after starting).
To turn blower off, turn knob all the way counterclockwise
. One click clockwise turns blower to high speed. Turn-
ing knob clockwise 
from high position decreases speed of blower. Figure 31
Figure 31 - Blower Knob
83D0511 | 27 |
