CALLER ID (CID)
However, when you dial directly from Caller ID (CID) memory, only the last 7 digits of the received telephone number will be used. Consequently, you would actually dial this:
The VTech VT 1930c was designed to accommodate this situation. If you need to temporarily add a long dlstance prefix and /or area code (such as 1503) before the Caller ID (CID) number, do the following:
¥Beginning from the standby mode, key in the necessary digits. Your display will look like this:
¥Then, to temporarily add the last 7 digits only from a Caller ID (CID) memory, press CID .
¥ Using the 
( *) and 
(#) keys, scroll through the received calls to locate the number you wish to dial.
¥Once you have located the number you wish to dial, simply press PHONE . The last seven digits will be added to the numbers already in the display, and the whole number shown below will be automatically dialed.
Special Message Indicators Out of Area Calls
If for any reason the telephone number of the caller is unavailable, or if the caller is outside the Caller ID (CID) service area, the message UNAVAIL- ABLE is displayed.
ÒPrivateÓ Calls
If the caller has exercised the option to block his or her number from being sent, then the display will show
PRIVATE.
Transmission Error
If an error is detected, then the Caller ID (CID) information is incomplete
and will not be displayed. TRANSMISSION ERROR will be displayed.
The occasional appearance of TRANS- MISSION ERROR on your display does not indicate a problem with your unit or your telephone line. However, if this appears frequently, you may want to notify your telephone com- pany.
33
