CALLER ID (CID)
Reviewing Numbers
Calls stored in memory can be reviewed by pressing CID . The display will show the number of the most recent (Call #01). The top line of the display is used to indicate the memory location number and the bottom line of the display shows the name, see below:
Pressing the 
(* ) key displays the next lower in sequence call record.
Likewise, pressing the 
(#) key displays the next higher in sequence) call record. The higher the call number, the older the call.
To save you time in reviewing call records, you can 
( * ) key enough to scroll back to the first record, pressing it again will force the display to go to the very end of the call record.
There may be additional characters in the name which can not be shown on the current display. Press
the 
( 9 ) key. This will overwrite the Caller ID (CID) memory location on the top line to show up to a maximum of 15 alpha characters for the duration of the key press. The first
FLASH
PHONE
1
4
ghi
7
pqrs
tt*one
PAUSE
HOLD
2
abc
5
jkl
8
tuv
0
oper
OFF
3
6
mno
9
wxyz
#
REVIEWING NUMBER
PRESS CID
PRESS THE 
AND 
KEYS TO SCROLL
PRESS AND HOLD THE 7 
KEY TO VERIFY NUMBER
PRESS OFF TO EXIT
12 alpha characters will be on the top line with up to 3 additional characters on the second line.
To find out the corresponding phone number as well as the date and time of the call, press and hold the 7 
key. The date and time will be shown. Releasing the key will again show the caller's name.
MEM/PGM CID REDIAL
INT.COM CLR/DEL MUTE
34
