C24GA SERIES GAS CONVECTION STEAMERS

MAINTENANCE

WARNING: THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, OR SERVICING THE STEAMER.

Water Treatment System

A water treatment system is recommended for steamers. Refer to your supplier’s manual for normal maintenance procedures for proper scale-free operation recommendations.

Scale Related Maintenance

Periodic maintenance is necessary to keep your generator clean and efficient. Initially, after three months of steamer usage, it is recommended that you have your Vulcan-Hart authorized servicer inspect the generator. Local water conditions and steamer usage will determine the frequency that this service must be repeated; however, a minimum recommendation is once a year. This maintenance is not covered by warranty.

Draining Generator

At least once daily, turn the unit off with the power switch located on bottom cooking cavity, to drain the generator.

NOTE: DO NOT remove the electric supply or the unit will not drain.

Door Gaskets

If the door gasket is leaking due to a nick or cut, it must be replaced. Damage to the gasket sealing surface will cause steam leakage.

Flue

Annually (at minimum), when the steamer is cool, check the flue and clear any obstructions.

— 16 —

Page 16
Image 16
Vulcan-Hart C24GA6, ML-136022, ML-136021, C24GA10 operation manual Water Treatment System, Scale Related Maintenance, Flue