Manuals / Vulcan-Hart / Kitchen Appliance / Oven

Vulcan-Hart GCO4S ML-52425 Maintenance, Replacing Lamps, Service And Parts Information

Models: GCO4D ML-52354 GCO4C ML-52357 GCO4S ML-52425 GCO6D ML-114729 GCO6C ML-114730

1 24

Download 24 pages 8.67 Kb

Page 22

MAINTENANCE

WARNING: TURN OVEN OFF AND UNPLUG POWER SUPPLY CORD BEFORE PERFORMING ANY MAINTENANCE.

The fan motor comes with sealed bearings and requires no lubrication.

If this oven is placed on casters, it should be connected to the supply piping with the proper disconnect device and restraint. If it is necessary to disconnect the restraint, first turn off the gas supply. Reconnect the restraint before turning the gas supply on and returning the oven to its original installation position.

Annually check the flue, when cool, to be sure it is free of obstructions.

REPLACING LAMPS

•Allow oven to cool.

•Remove all racks by pulling forward, lifting up and out.

•Remove the right rack support by lifting up.

•Unscrew glass dome(s) from light body.

•Replace the bulb(s).

•Reassemble glass dome(s), rack support and racks by reversing the disassembly procedure.

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning your GCO Series Oven, contact the Vulcan-Hart Service Depot in your area (refer to listing supplied with this oven), or Vulcan-Hart Company Service Department at the address or phone number shown on the front cover of this manual.

– 22 –

Image 22

Vulcan-Hart GCO4S ML-52425, GCO6C ML-114730, GCO6D ML-114729 Maintenance, Replacing Lamps, Service And Parts Information

Contents

MODEL GCO4S ML-52425 GCO4D ML-52354 GCO4C ML-52357 GCO6D ML-114729 INSTALLATION OPERATION MANUALGCO SERIES GAS CONVECTION OVENS GCO6C ML-114730IMPORTANT FOR YOUR SAFETY FOR YOUR SAFETYUsing the GCO4C/GCO6C Oven Error Messages - GCO4C/GCO6C Oven TABLE OF CONTENTSUsing the GCO4S and GCO4D/GCO6D Ovens Controls - Model GCO4C/GCO6C Operating Hints Cleaning Cooking Guidelines MAINTENANCEKEEP THESE INSTRUCTIONS FOR FUTURE USE Installation, Operation And Care Of GCO SERIES GAS CONVECTION OVENSGENERAL INSTALLING BASIC OVEN INSTALLATIONINSTALLATION CODES AND STANDARDS UNPACKINGLEVELING ASSEMBLING THE LEGS TO THE OVENASSEMBLING THE CHIMNEY AND FLUE EXTENSION ASSEMBLING STACKED OVENS GAS AND ELECTRICAL DATA ASSEMBLING THE OVEN TO THE STANDELECTRICAL CONNECTIONS GAS CONNECTIONSGas Pressures and Orifices TESTING THE GAS SUPPLY SYSTEMBURNER AIR SHUTTER ADJUSTMENTS FLUE CONNECTIONSOPERATION CONTROLS - MODELS GCO4S AND GCO4D/GCO6D FigBEFORE FIRST USE USING THE GCO4S AND GCO4D/GCO6D OVENS PreheatingLIGHTING THE GCO4S AND GCO4D/GCO6D OVENS CookingTemperature Display When Timing Product THERMOSTAT CONTROL Temperature Display When Not Timing ProductCONTROLS - MODEL GCO4C/GCO6C Fig Roast Button Light If On - While Not Timing Product Temperature Knob When Not Timing ProductTemperature Knob When Timing Product Roast Button Light If On - While Timing ProductThermometer Button TIMER CONTROL Time Display While Not Timing ProductTimer Knob Heat LightHold Button Gentle Bake ButtonStop/Start Button Hold Button LightLIGHT SWITCH ON/OFF/OVEN COOL SWITCH2-SPEED FAN SWITCH GAS VALVECooking USING THE GCO4C/GCO6C OVENERROR MESSAGES - GCO4C/GCO6C OVEN End of DayROAST AND HOLD OPERATION CONSERVING ENERGY CLEANINGPROPER UTENSILS OPERATING HINTSProduct COOKING CHARTS Models GCO4S, GCO4D/GCO4C and GCO6D/GCO6CBAKED PRODUCTS TempProduct MEAT & FISH PRODUCTSMISCELLANEOUS PRODUCTS TempSERVICE AND PARTS INFORMATION MAINTENANCEREPLACING LAMPS TROUBLESHOOTING FORM 30903 Rev. B PRINTED IN U.S.A