Turn the filter power switch ON Fig | Vulcan-Hart GR85F ML-135535

4. Turn the filter power switch ON (Fig. 13).

3.While holding the discard hose at the base of the fitting, use your free hand to slide the collar away from the end of the female fitting (Fig. 12). Align the male and female parts of the quick disconnect line and push the hose onto the male connector discharge fitting. Release the collar. Pull the discharge hose away from the fryer to make sure discharge hose is fully inserted and locked.

	PL-41613
Gas Fryer		Electric Fryer
		Fig. 12

PL-41614

4. Turn the filter power switch ON (Fig. 13).

	PL-41615
Gas Fryer		Electric Fryer
		Fig. 13

PL-41616

5.Place the nozzle in a suitable discharge container. To start the pump, pull the white discard valve handle out (Fig. 14); the oil begins to flow through the discard hose. If the discharge container is not large enough for the entire amount, stop the pump by pushing in the white discard valve handle, empty the container and resume. When the last of the oil is in the discharge container, stop the pump by pushing in the white discard valve handle, turn the filter power switch OFF and disconnect the discharge hose (Fig. 15).

6.Clean the filter drawer following the instructions on page 10.

PL-41617

PL-41618

Fig. 14

Fig. 15

– 9 –

Vulcan-Hart GR85F ML-135535, GRD85F ML-126741, GR35F ML-126998 Turn the filter power switch ON Fig

Models: ERD50F ML-135561 GR65F ML-135534 GRC65F ML-126739 GRD65F ML-126738 GRC45F ML-126736 GR85F ML-135535 ERC50F ML-135565 GR45F ML-126999 GR35F ML-126998 ERD85F ML-135563 GRC85F ML-126742 GRD35F ML-126732 GRC35F ML-126733 GRD45F ML-126735 GRD85F ML-126741

4. Turn the filter power switch ON (Fig. 13).