Vulcan-Hart ICM48, ICM24, ICM36, ICM60, ICM72 service manual Replacement Of Pilot Adjustment Valve

4. Disconnect the valve from the manifold pipe. (See Fig. 5)

NOTE: It may be necessary to remove heat shield to disconnect the valve. 5. Install new valve using pipe dope and reversing steps 1-4.

REPLACEMENT OF PILOT ADJUSTMENT VALVE

1.Follow steps 1 and 2 under Removal of Burner Valve.

2.Disconnect the compression nut from the pilot tube with 1⁄2" wrench. (Fig. 6)

Fig. 6

3. Disconnect the pilot valve from the manifold pipe. (Fig. 7)

Fig. 7

— 8 —