HP R3030US, R3065US Removal and Replacement Preliminaries, Tools Required, Service Considerations

4

Removal and Replacement Preliminaries

This chapter provides essential information for proper and safe removal and replacement service.

4.1 Tools Required

You will need the following tools to complete the removal and replacement procedures:

■Magnetic screwdriver

■Phillips P0 screwdriver

■5.0-mm hex socket for system board standoffs

■Flat-bladed screwdriver

■Tool kit (includes connector removal tool, loopback plugs, and case utility tool)

4.2Service Considerations

The following sections include some of the considerations that you should keep in mind during disassembly and assembly procedures.

✎As you remove each subassembly from the Expansion Base, place the subassembly (and all accompanying screws) away from the work area to prevent damage.

Maintenance and Service Guide 4–1