HP R3056RS, R3065US, R3070US, R3060US, R3050US, R3050EA, R3060EA, R3057EA, R3040EA, R3001 Expansion Cable

Removal and Replacement Procedures

5.10 Expansion Cable

Spare Part Number Information

Expansion cable 347435-001

1.Prepare the Expansion Base for disassembly (Section 5.3).

2.Remove the base plate (Section 5.4).

3.Remove the upper chassis (Section 5.5).

4.Remove the front tray cover (Section 5.8).

5.Remove the back panel (Section 5.9).

6.Turn the upper chassis right-side up with the rear facing you. Rotate the chassis so that the expansion cable connector is facing away from you.

7.Remove the four PM2.0×2.0 screws 1 that secure the expansion cable clamps to the chassis.

8.Remove the expansion cable clamps 2 and the expansion cable 3.

Removing the expansion cable clamps and expansion cable

Reverse the above procedure to install the expansion cable.

Maintenance and Service Guide 5–17