HP R3050EA, R3065US, R3070US, R3060US, R3050US, R3056RS, R3060EA, R3057EA, R3040EA manual Speaker Assembly

Models: R3006AP R3017AP R3004XX R3010EA R3016AP R3030US R3000Z R3004US R3060EA R3013AP R3023AP R3000T R3038CL R3050EA R3009AP R3024AP R3010AP R3056RS R3070US R3065US R3019AP R3002AP R3003AP R3050US R3000 (AMD) R3040EA R3008AP R3007AP R3030EA R3002 R3001 R3001US R3060US R3011AP R3014AP R3005AP R3004AP R3057EA R3015AP R3001AP R3003US R3003XX

1 74

Page 47

Removal and Replacement Procedures

Speaker assembly	347431-001

1.Prepare the Expansion Base for disassembly (Section 5.3).

2.Remove the base plate (Section 5.4).

3.Remove the upper chassis (Section 5.5).

4.Remove the front tray cover (Section 5.8).

✎Although the back panel and expansion cable are not shown in the figure, it is not necessary to remove them.

5.Turn the upper chassis upside down, with the bottom facing you and the speaker assembly facing down.

6.Remove the 6-wire audio control cable 1 and the 4-wire speaker cable 2 from the chassis hole through which they are routed.

7.Remove the two PM2.0×4.0 screws 3 that secure the speaker assembly to the chassis.

Removing the speaker assembly screws

5–18	Maintenance and Service Guide

Image 47