VXI Technology, Inc.

GENERAL DESCRIPTION

The CT-400 mainframe is a C-size, thirteen-slot, VXIbus compatible mainframe that conforms fully to VXIbus Specification Revision 1.4. The mainframe employs a multi-layer backplane to ensure premium VXIbus and VMEbus performance and provides all power supplies required by the VXIbus specification.

The CT-400 mainframe contains thirteen slots in the card cage, twelve of which are available for use by VXIbus compatible instruments. The thirteenth slot in the card cage (slot 0) is typically dedicated to the VXIbus Resource Manager.

POWER SUPPLIES

The CT-400 is designed to operate at line frequencies from 47 Hz to 440 Hz and is factory preset to operate at a nominal line voltage of 115 V ac. The ac input is both auto-voltage and auto- frequency ranging and may be reconfigured to operate at a nominal 220 V ac by simply changing the fuse located at the rear of the chassis.

The power supply assembly is completely removable from the rear of the mainframe. The assembly is short-circuit, over-voltage, reverse-voltage and thermal-shutdown protected. In addition, all supply lines are monitored and displayed on the front panel to provide user-feedback of correct operation.

BACKPLANE

The CT-400 has a jumperless auto-configurable backplane with automatic bus grant and IACK jumpering. There is also a custom power sub-panel to distribute all the supply lines across the backplane, as well as a 10-layer stripline construction that minimizes crosstalk.

COOLING

The airflow design uses a pressurized plenum system with a baffling system to guarantee enough cooling capacity. The cooling direction for the VXI instruments is air is drawn through the back of the mainframe and exhausted out both sides at the top. The power supply is cooled by an airflow that moves from left (if facing the mainframe) to right.

12

CT-400 Introduction

Page 11 Page 13
Page 12
Image 12
VXI CT-400 user manual General Description, Power Supplies, Backplane, Cooling
Page 11 Page 13

CT-400 specifications

The VXI CT-400 is an advanced test and measurement platform designed to cater to the needs of engineers and technicians across various industries, including telecommunications, aerospace, and defense. Known for its robust performance and versatility, the CT-400 offers a comprehensive range of features that streamline testing processes, ensuring accuracy and efficiency.

One of the main features of the VXI CT-400 is its modular architecture. This design allows users to configure the system according to their specific requirements, accommodating different testing applications. With a variety of interchangeable modules, users can easily customize their setup for a wide range of tests, from RF and microwave measurements to digital signal processing.

The CT-400 leverages cutting-edge technologies to deliver precise results. Equipped with high-resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), it ensures fidelity in the measurement and reproduction of signals. The device also integrates advanced signal processing algorithms that facilitate enhanced data analysis, making it easier to interpret complex measurement results.

Another notable characteristic of the CT-400 is its support for various communication protocols. This flexibility allows engineers to seamlessly integrate the device into existing test environments, making it compatible with other testing equipment and software platforms. Whether dealing with legacy systems or modern applications, the CT-400's interoperability plays a crucial role in enhancing productivity.

In terms of user experience, the VXI CT-400 is designed with an intuitive interface that simplifies operation. A large, high-resolution display provides clear visualization of measurements, while easy-to-navigate menus enable swift access to different functions. This user-centric design minimizes the learning curve, making it accessible for both experienced professionals and newcomers in the field.

Furthermore, the CT-400 is built with durability in mind. Its rugged construction ensures reliable operation in diverse environments, including harsh industrial settings. This resilience is complemented by robust software support, enabling regular updates and the addition of new features to keep the device up-to-date with technological advancements.

In conclusion, the VXI CT-400 stands out as a powerful test and measurement solution characterized by its modular design, advanced technologies, versatile communication capabilities, intuitive interface, and rugged construction. With these attributes, it serves as an indispensable tool for engineers striving for precision and efficiency in their testing processes.
Top Page Image Contents