OPERATION
Using the Mixer
1.Before handling the beaters, make sure that the mixer is not plugged in to an electrical outlet and that the speed control switch is in the “O” off position. Insert the beaters by holding the hand mixer handle in one hand and then pushing the beater stem into the opening, rotating slightly until it locks into position. Repeat the procedure to insert the other beater.
2.Plug the power cord into a standard electrical outlet.
3.Place your ingredients into a bowl, grip the hand mixer handle and position the beaters in the center of the ingredients to be mixed.
4.Select the speed setting that matches your mixing task.
5.Guide the beaters continuously through the mixture to mix the ingredients. Whenever you wish to scrape the sides and bottom of the bowl using a
Dough Hook Attachments
6.This mixer is provided with a pair of dough hooks for kneading dough. Fill the bowl with a mixture of desired flour and water, yeast, etc., then insert the dough hooks into the mixer following the same method used for inserting the beaters. Make sure that the dough hook with the smaller washer is placed in the
Fig. 2
5
