MUTE
The Wadia 302 CD Player has two mute modes that are automatically implemented under different circumstances.
1.Software Mute: When the MUTE key is pressed on the remote control, the Wadia 302 CD Player DSP engine transmits a stream of zero
2.Relay Mute: The Wadia 302 CD Player has mute relay connected between the positive and negative outputs. When this relay is engaged, it connects the positive output to the negative output, reducing the output to zero. This relay, which produces an audible click when it engages or disengages, is not in the music signal path. The mute relay is engaged under any of the following three conditions:
•Each time the Wadia 302 CD Player power switch is turned on.
•When the Wadia 302 CD Player detects AC input level below its minimum operating range.
•When the volume control is set to zero AND the MUTE key on the remote control is pressed.
When the Wadia 302 CD Player is in either software or relay mute, the Mute indicator on the front panel will illuminate. Note that the CD will continue playing even when the output is muted.
INPUT
The Wadia 302 CD Player can be configured with four optional digital inputs (See section on Optional Inputs). Each time the INPUT key is pressed, the next input is selected. For example, if you are listening to the internal CD drive, and you press the INPUT, Input 1 will be selected. Press it again, and Input 2 will be selected and so on. After Input 4, the list will begin again with the internal CD drive.
INVERT
Pressing the INVERT key on the remote control will cause the Wadia 302 CD Player to invert phase; pressing it again will switch the phase back to normal. When the phase is inverted, the INVERT indicator on the front panel will illuminate.
REPEAT
Pressing the REPEAT key will repeat the entire disc, program, or single track continuously. Pressing it a second time will stop repeating. The repeat mode is indicated by the front panel display.
20